CONNECTION:
The cash registers are connected directly to the router using a network cable. Afterwards, connect the device to the same internet network to which the cash register is connected.
INSTALLATION:
To install the cash registers, follow the steps below:
From the bottom of the application, select Devices.
In the upper left section, you will find Printers and peripherals.
2. Click on “Add peripheral” in the upper-right corner.
3. Select the model you want to install.
4. The application will search for the printer on the network based on its IP address.
5. Once it is detected, click on the displayed result, which should be the IP address of the fiscal printer.
6. Name the printer and select the rooms (if you have multiple fiscal printers), then save the changes.
If the app cannot find the cash register during the search:
Look at the progress bar while the app is searching. If it jumps directly to 100% and finds nothing, the app did not scan the local network at all: the iPad did not grant it Local Network permission, which is requested only once, when the device is registered. If the progress bar increases gradually but still cannot find the device, it is a network or device issue. The steps for both situations are described in the article “Troubleshooting cash register connection issues with Ebriza POS / Ebriza POS NEXT.”
Next step:
See specific articles depending on the printer:
[tags: how to install a fiscal printer, printer settings, cash register, fiscal cash registers, datecs, partner]