The new type of printers, with the electronic journal, need to be connected directly to a router with a LAN cable. After that, you need to connect your device to the same network as the printer.
The following Datecs fiscal printer models do not require the print driver installation and are integrated in Ebriza:
Datecs DP-150
Datecs DP-25
Datecs WP-500
To install the new fiscal printers follow the steps:
Go to Printers in the POS menu
2. Press on the "+" icon.
3. Select the model that you have and you want to install.
4. Wait until the IP for the printer is found.
5. After it has been recognized, click on the IP address.
6. Name your printer, choose the rooms (if you want the fiscal receipt to be printed only for a certain room or if you have multiple printers) and save.
ATTENTION: Please make sure that the printer is set on Connection PC and that the connection is through LAN, otherwise it will not recognize it.
To see the settings on the printer and if this is through LAN connection you will need to:
Click ON from your printer.
Use the Up/Down arrows to reach Programming, Click Total.
Put in the printer's password provided by the manufacturer and click Total (the default is 0030 or 0000).
Use the Up/Down arrows to reach Configuration, Click Total.
Use the Up/Down arrows to reach Communication, Click Total.
Use the Up/Down arrows to reach Connection PC, Click Total.
Make sure that you have LAN on the screen.
Double click Total so that the changes are saved.
After this, use the Up/Down arrows to reach LAN, Click Total.
Option: DHCP needs to be on screen as: YES.
Double click on Total so that the changes to be saved.
The last step is to go back to the Connection PC from the Main Menu of the printer.