The new type of printers, which contain the electronic journal, need to be connected directly to a router with a LAN cable. After that, you need to connect your device to the same network as the printer.
To install the new fiscal printers follow the steps:
1. Go to Printers & Devices in POS menu.
2. Select the "+" icon.
3. Select Partner 200 or Partner 600.
4. Wait until the IP for the printer is found.
5. After it has been recognized, click on the IP address.
6. Name your printer, choose the rooms (if you want the fiscal receipt to be printed only for a certain room or if you have multiple printers) and save.
ATTENTION: To make sure that the printer is set to Connection PC, "Operator: 1" or the IP and hour of fiscal printer need to appear on the screen.
To see the settings on the printer, you will need to:
Press the MENU button from your printer.
Use the Up/Down arrows to reach Programming, Press Total.
Put in the printer's password provided by the manufacturer (default is 0000) and press Total.
Use the Up/Down arrows to reach ETHERNET PARAMETERS, Press Total.
Option: To have a dynamic IP, DHCP needs to be on screen as: YES.
Press Total so that the changes are saved.
The last step is to go back with the C button, until you see "Operator: 1" or the IP address and hour appear on screen.